DOS Games Discussion

Interon 2.0 · Experienced Member Joined: 24 Sep 2004 Posts: 54

http://ansis.folklora.lv/dosver/dosvr251.zip

Try that to prevent the "Incorrect DOS version" error message when transferring DOS 6 files to a Windows 9x system.

dokzero5 · Member Joined: 10 Apr 2005 Posts: 17

The machine i build for dos games is a Pentium 200 MMX (slow enough to scale down and fast enough to play later DOS games) with a S3 Vision 864 card (2 mb) and a old SoundBlaster 16 with a Yamaha DB50-XG daughterbord for the wavetable connector (that's a must have with games with good midi music).

kreats · Member Joined: 26 May 2005 Posts: 25

I went for an amd 5x86 133 - dunno why, it just seemed like the best of the 486 cpus

Forget the mobo chipset - but I made sure it supported the WB caching in the AMD cpu

32Mb RAM - don't need any more and 64Mb counts too slowly

Matrox Millenium II 4Mb for nice picture quality (and VESA support) .. though I think the ET6100 is probably the best choice (for compatibility) if you can find one

Pure3d 3dfx card - using this for descent II atm

SCSI cdrom, though I'm considering going back to IDE as the drive I have spins a little loudly

SB16, GuS, Yamaha DB50XG

Dodgy ol 14" monitor - I think one of the nicer sony 15" is what I'm aiming for though

Moslo works ok if I need to slow it down.. works fairly well in most instances.

dokzero5 · Member Joined: 10 Apr 2005 Posts: 17

I'm also a lucky owner of the DB50XG. Soundblaster 16 + DB50XG board = perfect. Together with the SuperWave32 probably the best midi you can get. Damn, Doom sounds soooo good with that card. Don't have a GUS though, probably should get one for those good ol' Scream/Fast tracker days, and always nice to have a little IRQ/DMA solving challenge :-)

W

GameMaster.EXE · Posted: Wed Jul 13, 2005 11:59 am Post subject:

IBM or Microsoft should release a special version of dos that is designed for gaming only. Maybe they would have if the 90's had lasted longer. The era of dos games seems to be coming to a close. I should have expected this from Microsoft. Leaving dos, their first creation, behind in the dirt and leading Windows on a rampage through the computer industry and Macintosh, out of breath, trying to catch up.

kreats · Member Joined: 26 May 2005 Posts: 25

One thing I've been looking into recently is getting the best sound going - as far as I can tell you need at least three things to get the best of all worlds.

A General Midi card/module
A MT32 compatible card/module
A Yamaha XG compatible card/module (though this is less necessary)

Plus a gravis ultrasound if you want to play old demos

You can get these in either external modules (EG MT32) or internal cards (LAPC-1) - haven't found the ideal combination yet, but I'm still investigating!

Lots of interesting discussion in this vein going on at:

http://www.queststudios.com/forum/index.php?sid=5b76293eb498e8e7cfe045b9a69e68b1

dosraider · Posted: Thu Jul 14, 2005 3:34 pm Post subject:

Retron · Newbie Joined: 15 Aug 2005 Posts: 1 Location: UK

The machine I use for my DOS needs is an old PC from 1999, self-built:

* A P3-450 with 384 MB RAM on an ABit BH6 motherboard
* Voodoo Graphics
* GeForce 3 Ti200
* SB AWE64
* 4x Panasonic IDE CD (ancient but still works)
* A 5.25" disk drive as well as a normal 3.5" model (I had quite a few old floppies from my XT days and secondhand 5.25" drives are dirt cheap)

DOS (well, what passes for DOS with Win98) dual boots with WinXP on that system and thanks to using an old fashioned ISA soundcard pretty much everything works on it.

The problems are the same as you'd expect on a machine like that:

* Runtime 200 errors (grr)
* No UniVBE support for modern games
* Occasional problems with protected mode games, eg Pinball Illusions - a swift Ctrl-F5 as the machine boots solves that though! Happy

My main machine is an Athlon computer with SB Live - sadly, although it provides DOS emulation of an SB16 it requires EMM386 to work which immediately rules out some games. It's also nowhere near as good as a hardware SB16 and due to a lack of an OPL3 chip it means games like Commander Keen run without sound. Not recommended!

dr_st · Posted: Sun Aug 21, 2005 4:11 pm Post subject:

Virax_Clone · Newbie Joined: 24 Sep 2005 Posts: 5

This is exactly what I tried aiming towards when I built my DOS/win98 box. Here are it's specs:

AMD K5 PR166 clocked @ PR200 speed
4x 32MB (128MB) 72-pin SIMMs
10GB hard drive for Windows 98 SE
1.6GB hard drive for DOS 6.22
40x LG IDE CD-ROM
1.2MB 5.25" floppy drive
1.44MB 2.5" floppy drive
PCI 2MB S3 video card connected to Monster 3D accellerator
SoundBlaster 16 ISA sound card (full length card)

I just need to find somewhere to place the system in my room so I can have easy access to it. =\

webe123 · Newbie Joined: 21 Jul 2006 Posts: 2

This the computer I just got and I think it is perfect for my older DOS gmaes and newer DOS games.
It is a Compaq Prosignia I got off ebay for 20 bucks! Here are the specs:

Pentium III 500Mhz Processor
128mb of RAM, upgradable to at least 512mb
6.4 GB Hard Drive You can add a second hard drive for more space if necessary
CD ROM Drive
Floppy Drive
PS2 Mouse Port
PS2 Keyboard Port
Video
Sound
Audio In and Out Ports
Microphone Port
Parallel Printer Port
2 USB Ports
Game Port
10/100 Ethernet Port
56K Modem
2 DB9 Type Serial Port for older hardware such as early digital cameras
Power Supply w/ Fan
Extra Case Fan
Keyboard
Mouse
Power Cord

This is going to be my DOS machine.

http://cgi.ebay.com/Compaq-Prosignia-PIII-500MHz-128MB-6-4GB-56K-10-100_W0QQitemZ8829362405QQihZ005QQcategoryZ51114QQrdZ1QQcmdZViewItem

I have an AMD 2600 CPU computer for my modern games.

I have put win 98SE on it and have a soundblaster 16 PCI card in it (I replaced the other sound card that was in it with this) and I also have a Diamond Viper V730 video card that came on the system. It was a system I got off ebay from a place called Luminous recyclying..they buy old computers from offices that are replacing their out of date equpiment with newer computers.

I had to have my own legal version of windows 98SE to put on it...as the hard drive was formatted with FAT 32. But I did and it works flawlessly on this machine. I am going to add a 56K modem I bought off of newegg.com for 11 bucks to it as the one that is on there does not work and add a CD Burner that I can get cheap locally at a shop. The case is very wierd! The screws are not standard screws, but I have found a way to replace sound and other cards, by using a jewelers flathead screwdriver with vise grip pliers attached to it. (Hey, it works!)

I will probably have to take it to a shop to get the CD burner put in...as the computer only has one opening on ONE side of it to get at the cards....To open the other side ...I think they may have to literally unscrew it from the main frame! Because it has screws on the back and front and the cover wraps around three sides of the computer from what I can see.

But this is my new DOS machine and I will make it work.

SpaceFans · Posted: Thu Aug 03, 2006 9:34 pm Post subject:

Good running Pc for old Dosgames will have to be a 486 computer I have a 486 computer in my room but the only thing is that my cd-rom and my floppy disk is not working so can some one help me out to know where I can get a 486 cd-rom and a 486 floppy disk