| Author |
Message |
dosraider
Moderator
Joined: 15 Mar 2005
Posts: 6797
Location: ROTFLMAO in Belgium.
|
 Posted: Fri Oct 09, 2009 4:25 am
Post subject: |
 |
|
| Ealhaya wrote: |
I don't have the real CD as it's at my brother's place, so he sent me an ISO which I mounted with Daemon tools lite. the D: I mounted is the virtual drive, but I supposed DosBox wouldn't see the difference)
would mounting a cue or bin do the trick ?? |
-> Try to mount the ISO directly in dosbox 0.73(don't use daemon tools) with imgmount.
imgmount d "x:\path\name.iso" -t iso
-> Won't hurt to try with a BIN/CUE, use a good soft to create it, as is:
http://www.imgburn.com/
Mount it also directly in dosbox with imgmount
imgmount d "x:\path\name.cue" -t iso
-> Ask your brother to make a good copy of the CD. |
|
| Back to top |
|
 |
Ealhaya
Guest
|
| Posted: Fri Oct 09, 2009 6:05 am
Post subject: no cd |
|
|
Hi again.
thank you for the so quick answer !!!!
I just tried the imgmount but to no effect, I still get the no cd-rom error.
(i replace my D: autoexec line, so I don't think re-installing is the solution ?)
is it possible that it won't work because of a cd protection ? |
|
| Back to top |
|
|
Ealhaya
Guest
|
| Posted: Fri Oct 09, 2009 6:10 am
Post subject: testing |
|
|
I'm currently writing a bin.
will come back to you.
I think I'll also try Virtual PC as it's free... |
|
| Back to top |
|
|
Ealhaya
Guest
|
| Posted: Fri Oct 09, 2009 6:25 am
Post subject: cue/bin |
|
|
hey again
I burned a bin/cue and tried mounting the cue, but it just doesn't work.
I always get an error :
Could not load image file: C:\DOSPROG\ISO\SWIV-3D.cue"
MSCDEX: Failure: Path not valid
but I still can load easily the iso, and could load the bin.
but when launching I still get a NO CD error.
too bad.
I was so happy to play it again ! |
|
| Back to top |
|
|
dosraider
Moderator
Joined: 15 Mar 2005
Posts: 6797
Location: ROTFLMAO in Belgium.
|
| Posted: Fri Oct 09, 2009 7:32 am
Post subject: Re: cue/bin |
|
|
| Ealhaya wrote: | Could not load image file: C:\DOSPROG\ISO\SWIV-3D.cue"
MSCDEX: Failure: Path not valid |
Not a valid Dos name.
Delete and try again, but this time name your image
swiv3d.cue / swiv3d.bin
Remark: delete it, don't simply rename it, won't work (... it's possible, but a bit more complicated ....)
[Edit]
For good understanding:
I mean that you create the bin/cue from the original CD.
Not using the probably faulty ISO / a CD burned from that ISO,...... I doubt that would work. |
|
| Back to top |
|
|
Ealhaya
Guest
|
| Posted: Fri Oct 09, 2009 9:57 am
Post subject: cd |
|
|
I tried from the ISO you're right it didn't work.
thanks for all your help, I'll be back when I'll have that new copy ! (probably in a few weeks, I'll have to go to his place)
bye |
|
| Back to top |
|
|
peregrine581
Guest
|
| Posted: Sun Nov 15, 2009 9:10 pm
Post subject: Using DOSBox for Swiv |
|
|
| So... I get the error message when I follow everything that says "this is a Windows NT windowed executable." What did I do wrong, and what does that mean? |
|
| Back to top |
|
|
dosraider
Moderator
Joined: 15 Mar 2005
Posts: 6797
Location: ROTFLMAO in Belgium.
|
| Posted: Mon Nov 16, 2009 2:04 am
Post subject: |
|
|
It means it's a a Windows NT windowed executable....?
Maybe tell what you're talking about....? |
|
| Back to top |
|
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
